spec no: dsaf2059 rev no: v.1 date: apr/11/2005 page: 1 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp: 1102001676 package dimension s wp7113wyp/sec/h hype r orange description this devices are made with ts ingaaip. features outstanding material efficiency. reliable and rugged. ic compatible/low current capability. housing material: ppa. package : 65 pcs/tube. high temperature resistant housing. rohs compliant. t- 1 3/4 (5mm) housing for led lamp notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. specifications are subject to change without notice.
spec no: dsaf2059 rev no: v.1 date: apr/11/2005 page: 2 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp: 1102001676 selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 ? 1/2 wp7113wyp/sec/h hyper orange (ingaalp) water clear 3800 10000 20 symbol parameter device typ. max. test conditions units peak peak wavelength hyper orange 640 nm i f =20ma d dominant wavelength hyper orange 630 nm i f =20ma ? 1/2 spectral line half - width hyper orange 25 nm i f =20ma c capacitance hyper orange 27 pf v f =0v;f=1mhz v f forward voltage hyper orange 2.2 2.8 v i f =20ma i r reverse current hyper orange 10 ua v r = 5v parameter hyper orange units power dissipation 120 mw dc forward current 30 ma peak forward current [1] 150 ma reverse voltage 5 v operating/storage temperature - 40c to +85c note: 1. 1/10 duty cycle, 0.1ms pulse width.
spec no: dsaf2059 rev no: v.1 date: apr/11/2005 page: 3 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp: 1102001676 hyper orange wp7113wyp/sec/h
spec no: dsaf2059 rev no: v.1 date: apr/11/2005 page: 4 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp: 1102001676 wp7113wyp/sec/h ic tube dimensions remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|